These time switches are designed to operate high load lighting equipment, consisting of a premium quality precision synchronous clock motor and a high amperage switching circuit. All Green Air Products controllers are housed in black anodized brush finish aluminum enclosures which will not break, chip or corrode. They operate with a maximum combined outlet switching capacity of 40A. Plug or wire the power cord into a receptacle capable of handling the maximum total combined amperage draw of your equipment load. Make certain that the receptacle, wiring and circuit breaker are adequate and properly suited for this application. Plug lighting equipment into outlets located on each side of controller. Turn clock dial to current time of day. AM and PM is indicated by colored ring on dial face. Push trippers toward the center of the dial for "on" time and leave in the outward position for "off" period. Timer has 96 non-detachable 15 minute on/off trippers.
A typical installation of the LT8 lighting timer can be wired directly to a breaker in a service panel or via a sub panel or junction box. Electric range or dryer plugs are an optional, safe and a convenient way to provide a hookup.
The LT8-240 provides eight 5A 240V outlet receptacles, each capable of powering up to 1000W of lighting equipment.